Licensed & Insured
California state appliance repair license
Electrolux dryer not drying? Same-day repair
EFME, EFMG, IQ-Touch, Wave-Touch — Electrolux laundry for style-conscious homes in Irvine and Ladera Ranch. Perfect Steam, Predictive Dry, LuxCare. Call before 2 PM — we come today. If we don't fix it, you don't pay.
If we don't fix it, you don't pay
Free Vent Inspection
Clogged vent is a fire hazard. We check and clean it with every repair
90-Day Warranty
On parts and labor
9 of 10 Fixed Same Day
Belts, rollers, heating elements — all in the van
Dmitri
Electrolux / Frigidaire Technician · Orange
Electrolux Group owns Frigidaire — and both brands share the same appliance platform. That means Electrolux parts are widely available and competitively priced, which makes repairs straightforward and cost-effective.
One pattern Dmitri sees often on IQ-Touch and Wave-Touch models: the rear drum bearing starts to fail 3–6 months before the belt snaps. You'll hear a low grinding/rumbling sound that grows over weeks — that's the #1 noise complaint on Electrolux front-load dryers. Catching it early saves the belt and the drum shaft.
New Electrolux: $900–$1,300. Average repair: $150. Repair almost always wins.
How the repair works
From your call to a working dryer — here's exactly what happens
1. Call Us
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
2. Diagnostics + Vent Check
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
3. Approve the Quote
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
4. Repair + Free Vent Clean
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
Common Electrolux dryer failures
Electrolux/Frigidaire parts — available and affordable
Not heating (30%)
Heating element, thermostat, or thermal fuse. Standard Electrolux-platform parts — most in stock. Cost: $120–$220.
Taking too long to dry (25%)
Predictive Dry sensors fouled by fabric softener residue, clogged vent, or thermistor. IQ-Touch cycle logs show over-time before owners notice. Cost: {{dryer_fix_takes_long}}.
Grinding / rumbling noise (20%)
Rear drum bearing — the #1 Electrolux noise complaint on EFME/Wave-Touch. Builds gradually over 2–3 months. Catch it before it snaps the belt. Cost: $120–$200.
Drum won't spin (15%)
Drive belt or motor. On EFMG/EFME the rear bearing often goes first (see above). Cost: $100–$180.
Error code on display (10%)
Control board or UI board. IQ-Touch touchscreen can freeze after a power surge. Cost: $350–$700.
We repair all major brands
Why we fix your dryer right the first time
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
1500
+
dryers repaired
5
min
diagnostics
95
%
fixed first visit
Electrolux dryer repair cost
Labor rate is flat. Parts are at cost plus markup. We quote everything BEFORE we start.
| Issue | Labor (flat) | Part | Total |
|---|---|---|---|
| Not heating (element / gas igniter) | $80 | $40–$140 | $120–$220 |
| Drum won't spin (belt) | $80 | $20–$100 | $100–$180 |
| Won't start (thermal fuse) | $80 | $15–$70 | $80–$150 |
| Noisy / squeaking (drum rollers) | $80 | $40–$120 | $120–$200 |
| Takes too long (clogged vent / sensor) | $80 | $0–$60 | $80–$200 |
| Error code (control board) | $120–$180 | $60–$200 | $180–$350 |
Diagnostic fee: $89 — waived when you book the repair.
If we don't fix it, you don't pay. Vent inspection included free with every repair.
Recent Electrolux repairs in Orange
Samsung DVE45, Orange — "Clothes wet after full cycle"
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
LG DLG, Anaheim — "Gas dryer, worried about safety"
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Whirlpool Cabrio, Tustin — "Stopped spinning mid-cycle"
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Same corporate platform, different market position. Electrolux Group owns Frigidaire — and many parts cross-reference. Electrolux sits in the premium tier: different electronics, quieter build, and features like Perfect Steam that Frigidaire doesn't offer. But the platform commonality keeps repair costs reasonable.
Perfect Steam passes water through a steam generator before the cycle. If steam isn't produced, the water inlet valve or the steam generator element is at fault. Both are a straightforward swap — no special tools.
Yes. A new EFME runs $900–$1,300. On a 6-year-old machine, a $350 repair gives you at minimum another 4–5 years. The only time we'd say 'think twice' is a full motor + control board failure on a 10+ year old unit — and we'll be upfront about that.
General dryer repair FAQ
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Reviews
★ ★ ★ ★ ★
Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
Useful pages
When fixing your dryer makes sense — and when it doesn't
tS, hE, dE — what they mean and what the repair costs
If we don't fix it, you don't pay. 90 days on parts and labor
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
Schedule Electrolux dryer repair
✓ EFME / EFMG · IQ-Touch · Wave-Touch
✓ Electrolux/Frigidaire parts in stock
✓ Perfect Steam · Predictive Dry · LuxCare
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878