Licensed & Insured
California state appliance repair license
Fisher & Paykel dryer not working? Same-day repair
DE, DG, AeroCare or the heat-pump ventless line — New Zealand engineering for design-conscious homes. Parts ship through the Haier/GE network. Call before 2 PM — we come today. If we don't fix it, you don't pay.
If we don't fix it, you don't pay
Free Vent Inspection
Clogged vent is a fire hazard. We check and clean it with every repair
90-Day Warranty
On parts and labor
9 of 10 Fixed Same Day
Belts, rollers, heating elements — all in the van
Dmitri
Fisher & Paykel Technician · Orange
Fisher & Paykel is a New Zealand premium brand now owned by Haier Group — the same parent as GE Appliances. Their dryers are popular in Irvine Spectrum condos and Newport Coast townhomes where the minimalist design and compact footprint fit modern laundry rooms.
The SmartDrive platform uses trolley wheels under the drum (not the rollers you'd find on US brands), and the belt is a proprietary F&P item. Parts come through the Haier/GE distributor network — typically 2–5 days.
Heat-pump note: F&P heat-pump models run at 35–50 °C and cycle times of 90–160 minutes are perfectly normal. A genuine failure shows as an empty condensate tank after a full load — not just "feels less hot."
How the repair works
From your call to a working dryer — here's exactly what happens
1. Call Us
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
2. Diagnostics + Vent Check
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
3. Approve the Quote
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
4. Repair + Free Vent Clean
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
Common Fisher & Paykel dryer failures
Haier/GE supply chain — parts in 2–5 days
Not heating (30%)
Heating element, thermostat, or thermal fuse on vented DE/DG models. Cost: $120–$220.
Not drying completely (25%)
AeroCare condenser block clogged with lint, overfull condensate tank (no drain pump), AutoSensing sensor fouled. Cost: {{dryer_fix_takes_long}}.
Drum won't spin (20%)
Belt, motor, or trolley wheels. F&P uses trolley wheels — proprietary belt. Cost: $100–$180.
Noisy (15%)
Trolley wheel or bearing wear, condenser fan lint buildup. F&P runs at 47–52 dB — any new sound is noticeable. Cost: $120–$200.
AutoSensing / error code (10%)
Control board or moisture/weight sensor. On touchscreen models: panel freeze after power surge. Cost: $350–$700.
We repair all premium brands
Why we fix your dryer right the first time
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
1500
+
dryers repaired
5
min
diagnostics
95
%
fixed first visit
Fisher & Paykel dryer repair cost
Labor rate is flat. Parts are at cost plus markup. We quote everything BEFORE we start.
| Issue | Labor (flat) | Part | Total |
|---|---|---|---|
| Not heating (element / gas igniter) | $80 | $40–$140 | $120–$220 |
| Drum won't spin (belt) | $80 | $20–$100 | $100–$180 |
| Won't start (thermal fuse) | $80 | $15–$70 | $80–$150 |
| Noisy / squeaking (drum rollers) | $80 | $40–$120 | $120–$200 |
| Takes too long (clogged vent / sensor) | $80 | $0–$60 | $80–$200 |
| Error code (control board) | $120–$180 | $60–$200 | $180–$350 |
Diagnostic fee: $89 — waived when you book the repair.
If we don't fix it, you don't pay. Vent inspection included free with every repair.
Recent Fisher & Paykel repairs in Orange
Samsung DVE45, Orange — "Clothes wet after full cycle"
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
LG DLG, Anaheim — "Gas dryer, worried about safety"
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Whirlpool Cabrio, Tustin — "Stopped spinning mid-cycle"
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
In California — not particularly rare. F&P is popular in condos and townhomes. Parts come through the Haier/GE distribution network — 2–5 days for most items. We'll confirm availability before scheduling.
No — that's the whole point. Condenser models collect moisture internally and don't need an exhaust duct. The tradeoff: the condenser block needs cleaning every 3 months to maintain efficiency. Neglect it and cycle times double.
Usually a fouled moisture sensor (metal bars inside the drum coated with fabric softener film). Wipe them with rubbing alcohol first. If that doesn't help, the sensor or control board may need replacement — Dmitri will check on-site.
General dryer repair FAQ
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Reviews
★ ★ ★ ★ ★
Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
Useful pages
Heat-pump T1 — certified premium repair
When fixing your dryer beats buying new
If we don't fix it, you don't pay. 90 days on parts and labor
Other dryer problems
Similar symptoms? Check if there's more than one issue.
Schedule Fisher & Paykel dryer repair
✓ DE / DG · AeroCare · Heat Pump
✓ SmartDrive · AutoSensing
✓ Haier/GE parts network
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878