Licensed & Insured
California state appliance repair license
Frigidaire dryer making noise or not heating? Same-day repair
FFRE, FFSE, Affinity, Gallery — Frigidaire dryers are straightforward and repair-friendly. Electrolux Group platform means affordable parts, quick turnaround. Call today. If we don't fix it, you don't pay.
If we don't fix it, you don't pay
Free Vent Inspection
Clogged vent is a fire hazard. We check and clean it with every repair
90-Day Warranty
On parts and labor
9 of 10 Fixed Same Day
Belts, rollers, heating elements — all in the van
Dmitri
Frigidaire / Electrolux Technician · Orange
Frigidaire is the value tier of Electrolux Group — and that shared platform is great news for repair. Parts are widely available, competitively priced, and cross-reference with Electrolux. Most repairs complete in a single visit.
The two patterns Dmitri sees most often: heating element failure on FFRE/FFSE around year 5–7, and rear drum bearing grinding on Affinity front-load models. The Affinity bearing tends to announce itself with a loud grinding sound 3–6 months before it causes the belt to fail. That grinding sound should not be ignored — catching the bearing early saves the drum shaft and the belt.
MoistureSense sensors are also sensitive to fabric softener buildup — a wipe with rubbing alcohol often resolves "takes too long to dry" without any parts needed.
How the repair works
From your call to a working dryer — here's exactly what happens
1. Call Us
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
2. Diagnostics + Vent Check
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
3. Approve the Quote
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
4. Repair + Free Vent Clean
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
Common Frigidaire dryer failures
Electrolux-platform parts — in stock, same-day repair in most cases
Not heating (30%)
Heating element burnout is the #1 Frigidaire failure — shorter service life than Whirlpool (5–7 years vs. 8–10). Cheap Electrolux-platform part. Cost: $120–$220.
Grinding / squeaking noise (25%)
Affinity rear bearing is the top noise complaint — it grinds for months before causing the belt to snap. Catch it early. Idler pulley squeak is the other common source. Cost: $120–$200.
Taking too long to dry (20%)
MoistureSense sensor fouled (wipe first), clogged vent duct, or a thermistor reading low and underheating. Gallery cycle logs often show over-time 3–5 runs before owners notice. Cost: {{dryer_fix_takes_long}}.
Drum won't spin (15%)
Drive belt or motor. On Affinity, often preceded by grinding bearing (related). Cost: $100–$180.
Won't start (10%)
Door switch — the #1 cause. On Affinity with electronic control: panel freeze after power surge, unplug for 5 minutes first. Cost: $80.
We repair all major brands
Recent Frigidaire dryer repairs in Orange
Samsung DVE45, Orange — "Clothes wet after full cycle"
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
LG DLG, Anaheim — "Gas dryer, worried about safety"
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Whirlpool Cabrio, Tustin — "Stopped spinning mid-cycle"
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Why we fix your dryer right the first time
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
1500
+
dryers repaired
5
min
diagnostics
95
%
fixed first visit
Quick Diagnosis: What's happening?
Check the symptoms you're seeing to find the likely cause and repair cost
Likely a simple fix
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Professional diagnostics needed
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Serious issue — call now
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
Frequently asked questions
Almost certainly the rear drum bearing. This is the most common serious failure on Affinity front-load dryers — the bearing grinds for months and then causes the belt to fail. Don't wait: a bearing replacement now is far cheaper than replacing the bearing, belt, and possibly the drum shaft later.
First: wipe the MoistureSense sensor bars inside the drum with rubbing alcohol — fabric softener film is the #1 cause. If that doesn't help, it's a thermistor or a clogged vent. We'll check all three on-site.
General dryer repair FAQ
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
What customers say about Frigidaire repairs
★ ★ ★ ★ ★
Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
Useful pages
When fixing your dryer makes sense — and when it doesn't
tS, hE, dE — what they mean and what the repair costs
If we don't fix it, you don't pay. 90 days on parts and labor
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
Schedule Frigidaire dryer repair
✓ FFRE / FFSE · Affinity · Gallery
✓ Electrolux-platform parts in stock
✓ MoistureSense · Quick Cycle · Sanitize
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878