Licensed & Insured
California state appliance repair license
Speed Queen dryer not heating or making noise? Same-day repair
TR, DR, DC series — commercial-grade construction built to run 20–25 years. Made in Ripon, Wisconsin. When something finally does break, OEM Alliance parts fix it right. Call today — we come same day. If we don't fix it, you don't pay.
If we don't fix it, you don't pay
Free Vent Inspection
Clogged vent is a fire hazard. We check and clean it with every repair
90-Day Warranty
On parts and labor
9 of 10 Fixed Same Day
Belts, rollers, heating elements — all in the van
Dmitri
Speed Queen Technician · Orange
Speed Queen (Alliance Laundry Systems) builds residential dryers to commercial laundromat standards — a heavy steel cabinet, a thick-walled drum, sealed bearings, and a heavy-duty 5-ribbed industrial belt rated for 10–15 years.
The DR/TR dial-timer models have no moisture sensors and no electronic control boards. That means almost nothing fails electronically. When something goes wrong after 12–15 years of service, it's almost always the element, the belt, or the door switch.
Normal operating note: Speed Queen is the loudest residential dryer on the market — 60–65 dB is normal. A steady, deep hum is not a failure. Watch for: growing rumble (drum bearing), squeak (idler pulley), or grinding (bearing starting to break down). Those are the real signals.
How the repair works
From your call to a working dryer — here's exactly what happens
1. Call Us
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
2. Diagnostics + Vent Check
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
3. Approve the Quote
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
4. Repair + Free Vent Clean
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
Common Speed Queen dryer failures
Alliance Laundry OEM parts — durable and available
Not heating (30%)
Heavy-duty open-coil element (12–18 year service life). If it failed before year 8, check the vent first — blockage is the usual cause. Cost: $120–$220.
Belt snapped (25%)
Speed Queen's 5-ribbed industrial belt lasts much longer than mass-brand belts — but it does eventually fail at year 12–15. Replacement is the same procedure as any dryer. Cost: $100–$180.
Growing rumble (20%)
Drum bearing failure — the #1 noise complaint on older Speed Queens. Builds over months. Catch it early: bearing removal on Speed Queen requires full drum disassembly. Cost: $120–$200.
Won't start (15%)
Door switch or thermal fuse. On dial-timer models: a stuck timer cam — works at some dial positions but not others (characteristic Speed Queen failure after year 10–12). Cost: $80.
DC5 control board (10%)
Only on DC5 electronic-control models. Timer or control board. Cost: $350–$700.
We repair all major brands
Recent Speed Queen dryer repairs in Orange
Samsung DVE45, Orange — "Clothes wet after full cycle"
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
LG DLG, Anaheim — "Gas dryer, worried about safety"
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Whirlpool Cabrio, Tustin — "Stopped spinning mid-cycle"
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Why we fix your dryer right the first time
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
1500
+
dryers repaired
5
min
diagnostics
95
%
fixed first visit
What's wrong with your Miele or Speed Queen dryer?
Select the symptoms you're seeing — we'll tell you the likely cause and what a repair costs on a premium machine
Likely a mechanical fix
On Miele and Speed Queen, single-symptom issues usually point to a belt, drum bearings, or heat fuse. These machines use OEM-only parts — expect parts costs higher than mass-market brands. Repair: $150–$350, 45–60 min.
Diagnostics first — then a clear quote
Multiple symptoms on a premium dryer often point to the heat exchanger (Miele heat-pump), drive motor, or moisture sensor. We run the analyzer before quoting. Estimated: $250–$550. Vent duct check always included — 70% of slow-drying issues trace back there.
Don't run it — call now
Burning smell + multiple failures on a Miele or Speed Queen means clogged vent (fire risk) or control board. Board repair: $350–$700. Compared to a replacement at $1,500–$3,500, it still makes sense. But time matters — call immediately.
Yes. Speed Queen runs at 60–65 dB — the loudest residential dryer on the market. Commercial-grade components vibrate. A steady deep hum is completely normal. What to watch for: a growing rumble that gets worse over weeks (drum bearing), a new squeak (idler pulley), or metal-on-metal grinding (bearing failure). Those need attention.
Absolutely. Speed Queen is designed for 20–25 years of service. A 15-year-old machine is middle-aged. OEM Alliance parts are available. A $200 repair on a machine built to commercial standards is always the right call.
Classic Speed Queen timer cam failure — a small plastic cam inside the mechanical timer wears or breaks after 10–12 years of service. At certain positions the timer doesn't complete the circuit. Timer replacement is a straightforward swap.
General dryer repair FAQ
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
What customers say about Speed Queen repairs
★ ★ ★ ★ ★
Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
Useful pages
Heat-pump T1 — certified premium repair
When fixing your dryer beats buying new
If we don't fix it, you don't pay. 90 days on parts and labor
Other dryer problems
Similar symptoms? Check if there's more than one issue.
Schedule Speed Queen dryer repair
✓ TR / DR / DC series — all models
✓ OEM Alliance Laundry parts
✓ Gas and electric
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878