Licensed & Insured
California state appliance repair license
Duet, Cabrio, or a classic Whirlpool model (including Maytag and Kenmore). Older Whirlpool dryers are the most repair-friendly machines on the market. Fixed in one visit. If we don't fix it, you don't pay.
California state appliance repair license
Clogged vent is a fire hazard. We check and clean it with every repair
On parts and labor
Belts, rollers, heating elements — all in the van
Whirlpool Dryer Tech · Orange
Whirlpool-made dryers (which includes Maytag, Amana, Roper, and many Kenmore models) are the gold standard for repairability. Especially anything over 10 years old.
Simple mechanicals, reliable motors, inexpensive parts. If your Whirlpool stopped heating or started making noise, don't replace it. A $150–$250 repair gives you another 10 years of service — something a new digital dryer with a touchscreen and a 2-year warranty can't promise.
Whirlpool Adaptive Defrost note: on Cabrio and Duet models with moisture sensing, if clothes come out damp after the cycle ends, the issue is usually the moisture sensor bars — a $30 part that I see fail regularly on 5–8 year old models.
From your call to a working dryer — here's exactly what happens
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
Classic and modern Whirlpool failures — and what they cost
90% of the time it's a burned-out heating element or a blown thermal fuse. Both are cheap Whirlpool parts. Replaced in 30 minutes from $80.
Snapped drive belt — the most common Whirlpool call. Belt replacement starts at $80. Motor is almost never the issue on Whirlpool.
Usually a failed door switch or blown thermal fuse. Both diagnosed instantly with a multimeter. Cheap parts, quick fix.
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
dryers repaired
diagnostics
fixed first visit
Check the symptoms you're seeing to find the likely cause and repair cost
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
★ ★ ★ ★ ★
Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
When fixing your dryer makes sense — and when it doesn't
tS, hE, dE — what they mean and what the repair costs
If we don't fix it, you don't pay. 90 days on parts and labor
Similar symptoms? Check if there's more than one thing going on.
✓ Whirlpool / Maytag / Amana heating elements, fuses, belts in the van
✓ Old models welcome — we know every Whirlpool design from the past 25 years
✓ $80 flat-rate labor
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878