Clothes still wet
Full load, full cycle — still damp. Piling up with each load.
Roper drum spins but clothes come out cold and wet?
Usually a heating element ($80–$140), thermal fuse ($15), or gas igniter ($60). Analyzer pinpoints the cause in 5 minutes. Vent cleaning included free. If we don't fix it, you don't pay.
Clogged vent is a fire risk
In 30% of 'not heating' calls the element is fine — a blocked vent overheated the thermal fuse. That same blockage is a fire hazard.
30–45 minutes
Average repair time. Roper Whirlpool-platform elements are standard stock — 9 out of 10 fixed same day.
If we don't fix it, you don't pay
Licensed & Insured
California state appliance repair license
Free Vent Inspection
Clogged vent is a fire hazard. We check and clean it with every repair
90-Day Warranty
On parts and labor
9 of 10 Fixed Same Day
Belts, rollers, heating elements — all in the van
Dmitri
Dryer Technician · Orange
1,500+ dryers repaired. "Not heating" is the most common call after "drum won't spin."
Roper's simple Whirlpool-platform design works in your favor here: no complex control board logic, just a heating circuit with 3–4 components. The analyzer reads the circuit in 5 minutes and tells us exactly which component broke the chain.
Important: when "not heating" is caused by a clogged vent, that same blockage is a fire hazard. Dmitri cleans the vent duct free of charge on every heating repair and verifies airflow with the analyzer.
How the repair works
From your call to a working dryer — here's exactly what happens
1. Call Us
Describe what's happening. Dmitry asks 2–3 questions and gives you a ballpark price on the spot.
2. Diagnostics + Vent Check
Dmitry tests the element, belt, rollers, motor — and always checks the exhaust duct. A clogged vent is a fire hazard.
3. Approve the Quote
Happy with the price — we fix it. Not happy — you only pay $89 for the diagnostic.
4. Repair + Free Vent Clean
We replace the part, clean the vent at no charge, run a full heat cycle, and show you how to prevent the issue from coming back.
5 reasons a Roper won't heat
Analyzer reads the heating circuit in 5 minutes — we know the exact cause
1. Burned heating element (40%)
Electric heating coil failed. Drum turns, air moves, but no heat. Same Whirlpool-platform element used on millions of machines — in stock. Labor: $80. Part: $80–$140.
2. Blown thermal fuse (30%)
Clogged vent overheated the machine — fuse permanently cut the heat circuit. Replace fuse AND clean vent, or the new fuse blows within a week. Labor: $80. Part: $15–$70.
3. Gas igniter (15% — gas RGD models)
Timer clicks, valve opens, but no ignition. Safe — the valve closes if there's no flame. Labor: $80. Part: $40–$120.
4. Thermostat / cycling thermostat (10%)
Not signaling heat or limiting temperature incorrectly. Analyzer traces the heat cycle. Labor: $80. Part: $30–$80.
5. Timer / control (5%)
Rare on dial-timer Roper — but a stuck timer cam can block the heat circuit at certain positions. Labor: $80. Part: $40–$100.
Why we fix your dryer right the first time
The average tech: "not heating — swap the element" ($150). Didn't help. "Then the thermal fuse" ($80). Still nothing. You pay three times. Our analyzer reads amperage on the element, air temp, and vent airflow in 5 minutes. One part, one visit — no guessing.
1500
+
dryers repaired
5
min
diagnostics
95
%
fixed first visit
Check it yourself in 2 minutes
Sometimes you don't need a technician
Air Fluff selected?
Roper dials have an Air Fluff / No Heat position. Make sure the dial is on a heat cycle.
Lint filter clean?
Clean after every load. A packed filter blocks airflow, overheats the thermal fuse, and kills the heat.
Vent duct clear?
Check for airflow at the exterior vent cap. Furniture pressed against the flex hose? If you haven't cleaned the duct in a year — call us.
240V supply?
Electric dryers need both legs of 240V. One tripped leg: drum runs, no heat. Flip the breaker fully off, then on.
Quick Diagnosis: What's happening?
Check the symptoms you're seeing to find the likely cause and repair cost
Likely a simple fix
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Professional diagnostics needed
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Serious issue — call now
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
What it costs to fix a Roper that won't heat
Labor rate is flat. Parts are at cost plus markup. We quote everything BEFORE we start.
| Issue | Labor (flat) | Part | Total |
|---|---|---|---|
| Not heating (element / gas igniter) | $80 | $40–$140 | $120–$220 |
| Drum won't spin (belt) | $80 | $20–$100 | $100–$180 |
| Won't start (thermal fuse) | $80 | $15–$70 | $80–$150 |
| Noisy / squeaking (drum rollers) | $80 | $40–$120 | $120–$200 |
| Takes too long (clogged vent / sensor) | $80 | $0–$60 | $80–$200 |
| Error code (control board) | $120–$180 | $60–$200 | $180–$350 |
Diagnostic fee: $89 — waived when you book the repair.
If we don't fix it, you don't pay. Vent inspection included free with every repair.
Specifically for "not heating": $120–$220 (labor + part). 70% of cases — element or thermal fuse.
Compare: a new dryer costs $700–$1,500. Repair extends service life by 5–10 years.
Recent 'not heating' repairs on Roper in Orange
Samsung DVE45, Orange — "Clothes wet after full cycle"
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
40 min, $200 (labor $80 + part $120)
Savings vs new: $900
LG DLG, Anaheim — "Gas dryer, worried about safety"
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
35 min, $170 (labor $80 + part $90)
Whirlpool Cabrio, Tustin — "Stopped spinning mid-cycle"
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
35 min, $140 (labor $80 + part $60)
Questions before you call
A common sequence: the element or thermal fuse failed, then a few "cold" cycles overloaded another component. The analyzer checks the entire circuit in one pass — you won't need a second visit.
Yes. Gas igniter, gas valve, thermostats — all standard. After every gas repair Dmitri checks for leaks with a certified gas detector before leaving. Same safety standard as a new installation.
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
What customers say
★ ★ ★ ★ ★
Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.
★ ★ ★ ★ ★
LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.
★ ★ ★ ★ ★
12-year-old GE dryer stopped heating. Burned heating element, diagnosed in 10 min. $190 total. Was already shopping for a replacement at $940.
Useful pages
When fixing your dryer makes sense — and when it doesn't
tS, hE, dE — what they mean and what the repair costs
If we don't fix it, you don't pay. 90 days on parts and labor
Recent repairs nearby
30 min $80Amy's dryer taking 3 hours per load. Electric bill doubled.
35 min $140Dryer stopped spinning with wet clothes inside.
35 min $170Gas dryer running cold. Owner concerned about gas leak.
40 min $200Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
We repair all major dryer brands
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
Three cycles and still wet?
One call — dryer heating again
✓ Whirlpool-platform elements in the van
✓ Vent duct cleaning — free with every heating repair
✓ $80 flat labor rate
✓ If we don't fix it, you don't pay
7725 Gateway, Irvine, CA 92618
Пн-Пт 8:00-19:00
Ph: (949) 739-8878