Amana humming but the drum won't turn?
Spinning again today.
80% of the time it's a snapped drive belt on the Whirlpool platform; sometimes it's the drum rollers or idler pulley. We confirm exactly which with an analyzer in about 5 minutes before quoting a fixed price. If we don't fix it, you don't pay.
Same-day service
One 5-minute inspection and we know exactly what to replace before quoting.
Snapped drive belt (~80%)
The most common cause at year 8–10. Motor hums, drum sits still — sometimes a rubber loop on the floor. Fixed in about 30 minutes.
Worn drum rollers (~10%)
The drum sags and stops turning, grinding before it fully stops. Always replaced in pairs.
Idler pulley (~5%)
The pulley that keeps the belt tensioned seized or broke — often fails alongside the belt.
Drive motor (~3%)
Rare — the motor won't rotate, may hum and stall or go silent. The analyzer reads current to confirm.
Door switch (~2%)
Complete silence at startup — the machine doesn't 'see' a closed door. Diagnosed with a multimeter.
Quick Diagnosis: What's happening?
Check the symptoms you're seeing to find the likely cause and repair cost
What's the likely fix?
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
Amana 'won't spin' repairs
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
What you get in one visit
Analyzer diagnostic
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
Free vent inspection
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Can't fix it — no charge
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
Why we fix your dryer right the first time
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
Dmitry — dryer & vent specialist
Amana dryer specialist · Orange
A drum that won't spin is one of the most common — and least expensive — calls I get.
The tell: motor hums, drum stays still. That's almost always the belt. If there's no sound at all, the problem is upstream — a thermal fuse or door switch.
Pro tip: if the belt snapped on an Amana that's 8+ years old, it's worth replacing the drum rollers at the same time. They're in the same assembly, and pulling it apart again in a year costs you another labor charge. I'll tell you honestly whether they need it.
No price-list games, no surprises
You approve a fixed price before any work — then it doesn't move.
Recent Amana belt repairs in Orange
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
If the belt snapped, should I replace the drum rollers at the same time?
If the Amana is 8+ years old — yes. The rollers are in the same assembly as the belt, so disassembling the machine a second time a year later means another labor charge. A belt + roller + idler pulley kit costs less than two separate service calls. On a newer machine (3–5 years), the belt alone is fine — I'll call it on-site.
The drum turns but with a jerk — what's that?
Usually worn drum rollers — one has worn more than the other, causing the drum to drop and lurch. Don't ignore it: continuing to run risks snapping the belt and bending the drum shaft.
I hear a click at startup but the drum doesn't move
The click is the relay engaging, but the motor isn't spinning up — could be a seized motor or a failed door switch. The analyzer traces the signal path in about 5 minutes and tells us exactly which node isn't responding.
What does dryer repair actually cost?
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Should I just buy a new dryer?
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
What if you can't fix it?
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
How fast can you get here?
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Is a dryer actually a fire risk?
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
Taking too long to dry — is that a breakdown?
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
How are you different from a handyman?
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
How much is the diagnostic fee?
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Have an Amana Question? Ask Us
Send your model number and what it's doing — we'll reply the same day.
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
We Cover All of Orange County
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
One call and your Amana spins again
- Whirlpool/Amana-platform belts in the van
- Belt replacement in about 30 minutes
- Diagnostic analyzer: $89 (waived at repair)
- If we don't fix it, you don't pay · 90-day guarantee + 30-day follow-up call