LG dryers won't run unless the door switch confirms the door is fully closed — latch, strike or switch. We carry LG door-latch assemblies and switches, and confirm the exact cause with an analyzer in about 5 minutes before quoting a fixed price. If we don't fix it, you don't pay.
Same-day service
We check latch, strike, switch and hinge in one visit before quoting.
The plastic latch hook cracks or snaps. The door won't click shut, or springs open during the spin cycle.
The switch contacts fail — the latch still clicks but no signal reaches the board, so the dryer won't start or stops mid-cycle.
The plastic catch the latch hooks into is worn or cracked — the door clicks but won't stay shut.
The door sags and latch and strike can't align — often from repeated heavy loading.
The switch works but the board never receives the signal. Rare — the analyzer confirms it.
Check the symptoms you're seeing to find the likely cause and repair cost
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
LG dryer specialist · Orange
LG door issues are one of the most straightforward fixes — but they stop the dryer completely, which is why customers call immediately.
How LG door safety works: the dryer needs both the mechanical click (latch engaging the strike) and the electrical signal from the door switch before it will start. If either fails, you get a no-start or a mid-cycle stop.
LG-specific note: on some LG front-loaders the door hinge develops play over time — the door hangs slightly lower and the latch can't reach the strike cleanly. I check hinge alignment alongside the latch and switch in one visit.
You approve a fixed price before any work — then it doesn't move.
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
Yes — the most common LG door switch symptom. The switch makes good contact when the door is pushed shut but loses the signal during vibration, so the board reads 'door open' and kills power. It's often intermittent — fine for a few loads, then three times in a row. A door switch replacement fixes it.
If your LG is 8+ years old — yes. Rollers and belt are in the same assembly zone, so a second visit for them adds labor. Roller kit + belt done together is always cheaper than two separate calls. I'll tell you on-site whether the rollers actually need it.
The relay is firing but the motor isn't starting — or the door switch lost signal exactly at the moment of start. The analyzer isolates the failing component in about 5 minutes.
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Describe what your dryer is doing and we'll reply the same day.
Similar symptoms? Check if there's more than one thing going on.
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
Same-day slots in Orange County, CA · If we don't fix it, you don't pay