Amana dryer not heating or won't spin?
Fixed today.
NED, NGD, or the older NDE/NDG generation — Amana dryers run on the Whirlpool platform, with simple mechanics and inexpensive parts. We diagnose with an analyzer in about 5 minutes, quote a fixed price up front, and check the vent free. If we don't fix it, you don't pay.
Same-day service
What's happening with your Amana?
Tap your symptom — or just call and we'll sort it out on-site.
Not heating (drum spins cold)
9 out of 10 times a burned heating element or a blown thermal fuse — both cheap Whirlpool-platform parts, replaced in about 30 minutes.
Motor hums but drum won't spin
The classic Amana/Whirlpool symptom at year 8–10: a snapped drive belt. The drum sits still while the motor runs.
Won't start at all
Usually the door switch or thermal fuse. Dial-only NED/NGD models can also freeze after a power blip — diagnosed instantly with a multimeter.
Stops early / takes too long
AccuDry moisture sensor fouled by softener film, or restricted airflow. We test the sensor and bring a 30-ft auger for the vent.
Quick Diagnosis: What's happening?
Check the symptoms you're seeing to find the likely cause and repair cost
What's the likely fix?
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
Amana dryer reviews
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
What you get in one visit
Analyzer diagnostic
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
Free vent inspection
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Can't fix it — no charge
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
Why we fix your dryer right the first time
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
Dmitry — dryer & vent specialist
Amana dryer specialist · Orange
Since 2002 Amana dryers share the Whirlpool platform — same belt, same drum rollers, same motor and heat chain. That means OEM parts are widely available and inexpensive, and the repair procedure is straightforward.
The NED/NGD series with their simple dial controls (no touchscreen to fail) are especially reliable. If your Amana stopped heating or the drum went quiet, don't replace it yet — a $150–$250 repair buys another decade.
Older pre-2002 Amana (made in Iowa on the original platform) is equally repairable — just a different heater-assembly design. I've worked on both.
No price-list games, no surprises
You approve a fixed price before any work — then it doesn't move.
Recent Amana dryer repairs in Orange
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
Should I repair a 15-year-old Amana dryer?
Yes — Amana's NED/NGD dryers have no fragile touchscreens or complex control boards, and the Whirlpool-platform mechanics are extremely repair-friendly. A single part swap gives the machine another decade; a comparable new dryer costs $600–$800.
My AccuDry sensor seems off — the dryer keeps stopping early
AccuDry moisture sensors are two metal bars inside the drum. Fabric-softener buildup creates an insulating film that fools the sensor into reading 'dry' too soon. Wipe the bars with rubbing alcohol — it fixes the problem 80% of the time with no service call.
What does dryer repair actually cost?
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Should I just buy a new dryer?
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
What if you can't fix it?
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
How fast can you get here?
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Is a dryer actually a fire risk?
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
Taking too long to dry — is that a breakdown?
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
How are you different from a handyman?
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
How much is the diagnostic fee?
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Have an Amana Question? Ask Us
Describe what your Amana is doing and we'll reply the same day.
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
We Cover All of Orange County
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
Book an Amana dryer tech
- NED, NGD, NDE/NDG — all series
- Whirlpool-platform parts in the van
- Diagnostic analyzer: $89 (waived at repair)
- If we don't fix it, you don't pay · 90-day guarantee + 30-day follow-up call