GE dryer squealing or not drying?
Fixed today.
From classic Hotpoint to GE Profile — the front drum-bearing glides are the most common GE repair we see. We diagnose with an analyzer in about 5 minutes, arrive with GE-specific parts, and check the vent free. If we don't fix it, you don't pay.
Same-day service
What's happening with your GE?
Tap your symptom — or just call and we'll sort it out on-site.
Squealing or scraping during spin
Worn front drum-bearing glides — a GE-specific issue. The nylon insert wears through and the drum edge contacts the bearing ring. An inexpensive fix that extends the dryer's life.
Not heating
A burned-out heating element or blown thermal fuse. GE parts are available and affordable — fixed in one visit.
Takes too long to dry
An airflow problem — clogged lint-trap housing or exhaust duct. We bring a 30-ft auger for professional duct cleaning.
Won't start
Usually the thermal fuse or door switch — diagnosed instantly with a multimeter.
Quick Diagnosis: What's happening?
Check the symptoms you're seeing to find the likely cause and repair cost
What's the likely fix?
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
GE dryer reviews
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
What you get in one visit
Analyzer diagnostic
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
Free vent inspection
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Can't fix it — no charge
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
Why we fix your dryer right the first time
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
Dmitry — dryer & vent specialist
GE dryer specialist · Orange
GE dryers have their own quirks — most notably the front drum-bearing glide. It's a nylon insert that supports the front of the drum, and when it wears out you get a distinctive high-pitched squeal on every revolution.
I carry GE drum-bearing kits (nylon glides and bearing rings) and drive belts in the van, so your GE will be drying quietly again the same day you call.
Classic GE, Hotpoint and GE Profile models are all welcome — the parts are affordable and the repairs are straightforward.
No price-list games, no surprises
You approve a fixed price before any work — then it doesn't move.
Recent GE dryer repairs in Orange
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
My GE squeals on every turn — what is that?
Almost always the front drum-bearing glide — a nylon insert worn through so the drum edge rubs the bearing ring. We replace the glide and bearing kit; it's an inexpensive fix that adds years to the dryer.
Do you work on GE Profile and Hotpoint models?
Yes — classic GE, Hotpoint and GE Profile all share the same core design. We carry the bearing kits, belts and heating elements for them in the van.
What does dryer repair actually cost?
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Should I just buy a new dryer?
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
What if you can't fix it?
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
How fast can you get here?
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Is a dryer actually a fire risk?
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
Taking too long to dry — is that a breakdown?
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
How are you different from a handyman?
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
How much is the diagnostic fee?
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Have a GE Question? Ask Us
Describe what your GE is doing and we'll reply the same day.
Other dryer problems
Similar symptoms? Check if there's more than one thing going on.
We Cover All of Orange County
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
Book a GE dryer tech
- GE drum-bearing glide kits & drive belts in the van
- GE Profile, Hotpoint and classic GE welcome
- Diagnostic analyzer: $89 (waived at repair)
- If we don't fix it, you don't pay · 90-day guarantee + 30-day follow-up call