TR, DR, DC series — commercial-grade construction built to run 20–25 years, made in Ripon, Wisconsin. When something finally breaks, OEM Alliance parts fix it right. We diagnose with an analyzer in about 5 minutes and quote a fixed price up front. If we don't fix it, you don't pay.
Same-day service
Tap your symptom — or just call and we'll sort it out on-site.
The heavy-duty open-coil element lasts 12–18 years. If it failed before year 8, we check the vent first — a blockage is the usual cause. We bring a 30-ft auger.
The 5-ribbed industrial belt lasts far longer than mass-brand belts but does fail at year 12–15. Replacement is the same procedure as any dryer.
Drum-bearing failure — the #1 noise complaint on older Speed Queens. It builds over months; catch it early, since bearing removal needs full drum disassembly.
Door switch or thermal fuse. On dial-timer models, a stuck timer cam — works at some dial positions but not others (a characteristic Speed Queen failure after year 10–12).
Check the symptoms you're seeing to find the likely cause and repair cost
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
Speed Queen dryer specialist · Orange
Speed Queen (Alliance Laundry Systems) builds residential dryers to commercial laundromat standards — a heavy steel cabinet, a thick-walled drum, sealed bearings, and a heavy-duty 5-ribbed industrial belt rated for 10–15 years.
The DR/TR dial-timer models have no moisture sensors and no electronic control boards, so almost nothing fails electronically. When something goes wrong after 12–15 years of service, it's almost always the element, the belt or the door switch.
Normal operating note: Speed Queen is the loudest residential dryer on the market — 60–65 dB is normal, and a steady deep hum is not a failure. Watch instead for a growing rumble (drum bearing), a squeak (idler pulley), or grinding (bearing breaking down). Those are the real signals.
You approve a fixed price before any work — then it doesn't move.
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
Yes. Speed Queen runs at 60–65 dB — the loudest residential dryer on the market, because commercial-grade components vibrate. A steady deep hum is completely normal. What to watch for: a growing rumble that worsens over weeks (drum bearing), a new squeak (idler pulley), or metal-on-metal grinding (bearing failure). Those need attention.
Absolutely. Speed Queen is designed for 20–25 years of service, so a 15-year-old machine is middle-aged. OEM Alliance parts are available, and a repair on a machine built to commercial standards is always the right call.
Classic Speed Queen timer-cam failure — a small plastic cam inside the mechanical timer wears or breaks after 10–12 years. At certain positions the timer doesn't complete the circuit. Timer replacement is a straightforward swap.
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Send your model number and what it's doing — we'll reply the same day.
Similar symptoms? Check if there's more than one thing going on.
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
Same-day slots in Orange County, CA · If we don't fix it, you don't pay