Duet, Cabrio or a classic Whirlpool (including Maytag, Amana and Kenmore models) — among the most repair-friendly dryers on the market. We diagnose with an analyzer in about 5 minutes, quote a fixed price up front, and check the vent duct free. If we don't fix it, you don't pay.
Same-day service
Tap your symptom — or just call and we'll sort it out on-site.
90% of the time a burned heating element or blown thermal fuse — both cheap Whirlpool parts, replaced in about 30 minutes.
A snapped drive belt — the most common Whirlpool call. The motor is almost never the problem.
Usually a failed door switch or blown thermal fuse — diagnosed instantly with a multimeter.
Worn drum rollers or idler on Cabrio and classic models. The analyzer pinpoints it fast.
Check the symptoms you're seeing to find the likely cause and repair cost
Check what you see on the left — we'll estimate the cause, the cost and how urgent it is.
Estimate only — the analyzer confirms the exact cause on-site.
Probable cause: belt, rollers, or thermal fuse. Repair: $100–$180, 30–45 minutes.
Probable cause: heating element + clogged vent, or moisture sensor. Repair: $120–$220, 30–60 minutes.
Multiple symptoms + burning smell — possible clogged vent (fire risk) or control board failure. Call immediately.
“Loud squeaking every rotation on our Samsung DV. Tech said Samsung drum rollers wear unevenly and you have to replace all four at once or the noise comes back in 6 months — replaced all of them. Silent now.”
“LG gas dryer not heating. Worried about safety. Tech found a cracked igniter, replaced it, and did a full gas leak check — all included. Fast and thorough.”
“Samsung dryer ran full cycles but clothes stayed damp. Heating element burned out. Fixed in 40 min for $200. New dryer would have been $1,100.”
★★★★★ 5.0 average · 29 verified reviews
We plug in the analyzer — in 5 minutes you see amperage on the element, air temp and vent airflow on the screen. The same data we read.
A clogged vent is a fire hazard — NFPA logs ~2,900 dryer fires a year in the US. We check and clean the duct with every repair.
Approve the repair and the $89 diagnostic is included. 90-day guarantee on all work, plus a 30-day follow-up call.
The average tech guesses: "not heating — swap the element." Didn't help. "Then the thermal fuse." Still nothing — you pay three times. Our analyzer reads amperage, air temp and vent airflow in 5 minutes. One part, one visit.
Whirlpool dryer specialist · Orange
Whirlpool-made dryers — which includes Maytag, Amana, Roper and many Kenmore models — are the gold standard for repairability, especially anything over 10 years old: simple mechanicals, reliable motors, inexpensive parts.
If your Whirlpool stopped heating or started making noise, don't replace it. A $150–$250 repair buys another 10 years — something a new digital dryer with a touchscreen and a 2-year warranty can't promise.
Cabrio / Duet note: if clothes come out damp after the cycle ends, it's usually the moisture-sensor bars — a ~$30 part I see fail regularly on 5–8 year-old models.
You approve a fixed price before any work — then it doesn't move.
WED/WGD front-load — heating element, thermal fuse, belt and moisture sensor are the usual calls.
Top-load high-efficiency — rollers, idler and moisture-sensor bars on 5–8 year-old units.
Older belt-drive workhorses — the most repairable dryers ever made, parts always in the van.
Built on the same Whirlpool platform — same parts, same fast fixes.
Lisa ran 3 cycles — clothes still damp. Ready to buy a new dryer.
Heating element burned out. Thermal fuse intact.
Gas dryer running cold. Owner concerned about gas leak.
Cracked igniter — no spark. Gas supply and connections safe.
Dryer stopped spinning with wet clothes inside.
Drive belt snapped. Drum rollers partially worn.
Strongly, yes — old Whirlpool and Maytag dryers are built from quality materials with no fragile control boards. They're the most repairable appliances ever made; one part can give the machine another decade.
On Cabrio and Duet models that's usually the moisture-sensor bars inside the drum — a ~$30 part. The dryer ends the cycle early because it misreads the load as dry. Quick fix.
Yes — heating elements, thermal fuses, belts, rollers and door switches for Whirlpool, Maytag, Amana and Kenmore dryers are standard stock in the van.
Most dryer repairs run $120–$220 total (labor + part). The most common issues — belt, rollers, heating element — are $20–$140 for the part and $80 for labor. We quote the exact price before we start, after diagnostics.
Depends on the machine. Here's how Dmitry looks at it:
Dryers are the most repair-friendly appliance out there. Parts are simple and cheap: belt $20, rollers $40, element $80, thermal fuse $15. They last for years — no sensitive electronics dying after three.
Real example: A Whirlpool 22 years old — replaced rollers twice at $40 each. Still runs. A Samsung 5 years old — control board failed, $400 repair. The old one was more reliable.
Exception: motor + board + element all at once on a 15+ year-old machine — we'll do the math together. If the repair exceeds $400 and the dryer is over 12 years old, sometimes a new one makes more sense.
Average repair: $150. New dryer: $700–$1,500 plus wait time. Full breakdown: repair vs. replace →
If we don't fix it, you don't pay. You only pay $89 for the diagnostic (service call + analyzer). More about our guarantee →
We're based in Orange. Usually 2–3 hours from your call. 9 out of 10 dryer repairs are done same-day: belts, rollers, heating elements — we carry them in the van.
Yes, if the vent is clogged. Wet lint builds up → overheating → ignition. According to NFPA, roughly 2,900 dryer fires happen in the US every year.
We clean the vent duct free with every repair. If it's been a while — call us, we'll check it. Usually $80–$150 if it's just a cleaning with no repair.
70% of the time — yes, it's a clogged vent or flex hose. The element heats, but humid air can't escape. We check airflow with the analyzer.
The other 30%: moisture sensor or heating element running below capacity. The analyzer shows which one in under 5 minutes.
A handyman does a bit of everything. Appliance repair is its own licensed specialty in California.
We have a diagnostic analyzer for pinpoint accuracy, a van stocked with parts, and direct supplier relationships with Samsung, LG, Whirlpool, and Maytag. A handyman will Google it — we see these failures every day.
$89 — waived when you go ahead with the repair. If we don't fix it, you don't pay. You only pay the diagnostic fee if you decide not to proceed.
Describe what your Whirlpool is doing and we'll reply the same day.
Similar symptoms? Check if there's more than one thing going on.
Same-day appliance repair across 40+ Orange County cities — from the coast to the canyons. If we don't fix it, you don't pay.
Same-day slots in Orange County, CA · If we don't fix it, you don't pay